Power Strip protector Product Description:
Protection class: Type 1, Class I
Pole number: 1P
Max. continuous operating voltage (Uc) (AC): 150V / 275V / 320V /
385V / 440V
Nominal discharge current (8/20μs) (In): 25kA
Max. discharge current (8/20μs) (Imax): 100kA
Remote contacts: available
Power distribution system: SPD in TN system.
BR-25GR 1P compliant with EN/IEC 61643-11 standards, tested and specified
according to both T1 and T2 test classes.
Surge Protection Device Feature:
· For electrical installations.
· Suitable for lightning protection of power supply system in areas
with high risk of lightning strike (LPZ0B or interface between
LPZ0B and LPZ1).
· Can handle lightning currents and protect sensitive electronic
equipment.
· Application-optimized and prewired combined lightning current.
· Particularly useful in a high lightning density area where the
risk of heavy surge current or even direct strike is high (e.g.:
buildings equipped with lightning rods).
Our Product
Type 1 surge protection device.
Type 2 surge protection device.
Type 1 + Type 2 surge protection device.
Type 3 surge protection device.
Type 2 + Type 3 surge protection device.
DC (pv, solar) surge protection device.
Type 1 SPD:
• The Type 1 SPD is recommended in the specific case of
service-sector and industrial buildings, protected by a lightning
protection system or a meshed cage.
• It protects electrical installations against direct lightning
strokes.
• It can discharge the back-current from lightning spreading from
the earth conductor to the network conductors.
• Type 1 SPD is characterized by a 10/350 µs current wave.
Our Services:
• 20 years global leading profession manufacture of electrical
products surge arrester.
• All products will be well packed before shipping.
• Standard packaging, and you can also tell us your own
requirements on packaging.
• Faster delivery.
• Individually Tested Prior to Shipment.
Installation:
• Used in the lightning protection zones concept at boundary
LPZ0B-LPZ1.
• Suitable as the first step of protection in incoming power supply
panels and areas with greater exposure to the atmosphere, where
installations are usually provided with an external lightning
protection system.
• Type 1 is placed at the entrance point of the installation, in
the main distribution board for a global protection of this
installation.
About us:
Wenzhou Britec Electric Co., Ltd. is a leading manufacturer and
professional exporter, specialized in low voltage surge protection
device products. Our products go well in Europe, South America, the
Middle East, Southeast Asia and other countries and regions.
Certificatte:
Our products offer full range of SPD products which has CE,
RoHS,TUV, SEMKO, CB certification.The company implements ISO9001
quality mangement system.
Shipping:
FAQ:
Q1: Selection of surge protector
Al: The grading of the surge protector (commonly known as lightning
protection) Is assessed according to the IEC61024 subdivision
lightning protection theory, which is installed at the junction of
the partition. Technical requirements and functions differ. The
first-stage lightning protection device is installed between the
0-1 zone, high for the flow requirement, the minimum requirement of
EN 61643-11 / IEC 61643-11 is 25 ka (10/350), and the second and
third levels are installed between the 1-2 and 2-3 zones, mainly to suppress the overvoltage.
Q2: Are you a lightning surge protectors factory or lightning surge
protectors trading company?
A2: We are a lightning surge protectors manufacturer.
Q3: Warranty and services:
A3:1. Warranty 5 years
2. lightning surge protectors products and accessories have been
tested 3 times before ship out.
3. We own the best after-sale service team, if any problem happens,
our team will do our best to solve it for you.
Q4: How can I get some lightning surge protectors samples?
A4: We are honored to offer you lightning surge protectors samples,
pis contact our staff, and leave detailed contact information, we
promise to keep your information confidential.
Q5: Is the sample available and free?
AS: Sample is available, but the sample cost should be payable by
you. The cost of the sample will be refunded after further order.
Q6: Do you accept customized order?
A6: Yes, we do.
Q7: What’s the delivery time?
A7: It usually takes 7-15days after confirming payment, but a
specific time should be based on the order quantity.
