Britec New Type 3 Surge Protection Devices BR-10DP Series 35mm Din
Rail
Britec Surge Protective Device Feature:
• This product has a one-piece design.
• Protection class: Type 3, Class III.
• Pole number: 2P.
• For DIN rail installation, with remote contact signaling
intervention.
• The type 3 SPD has Uoc of 10kV.
• Conforms to IEC61643-11 and EN61643-11.
• Green-Red status indication.
• Different Uc are available 275V, 150V, 75V and 30V for the
application in norminal voltage of 230V, 120V, 60V and 24V line to
protect the terminal equipments.
Britec Surge Protective Device Product Details:
| BR30-10DP 2P | BR75-10DP 2P | BR150-10DP 2P | BR275-10DP 2P |
| SPD classification according to EN61643-11 | Type 3 | Type 3 | Type 3 | Type 3 |
| SPD classification according to IEC61643-11 | Class III | Class III | Class III | Class III |
| Nominal a.c. voltage Un | 24V | 60V | 120V | 230V |
| Max. continuous operating a.c. voltage Uc | 30V | 75V | 150V | 275V |
| Max. continuous operating d.c. voltage Uc | 38V | 100V | 190V | 300V |
| Nominal discharge current (8/20us) In | 5kA | 5kA | 5kA | 5kA |
| Combined impulse Uoc | 10kV | 10kV | 10kV | 10kV |
| Voltage protection level Up | ≤200V | ≤500V | ≤700V | ≤1100V |
| Response time tA | ≤25ns | ≤25ns | ≤25ns | ≤25ns |
| Operating temperature range Tu | -40℃-80℃ | -40℃-80℃ | -40℃-80℃ | -40℃-80℃ |
| Operating state / fault indication | green / red | green / red | green / red | green / red |
| Cross-section area (Min.) | 2.5mm2 | 2.5mm2 | 2.5mm2 | 2.5mm2 |
| Cross-section area (Max.) | 16mm2 | 16mm2 | 16mm2 | 16mm2 |
| For mounting on | 35mm Din rail |
| Enclosure material | Thermal plastic UL94-V0 |
| Degree of protection | IP20 | IP20 | IP20 | IP20 |
| Order Code | B8237 | B8235 | B8359 | B8231 |
| Order Code (With remote signaling) | B8238 | B8236 | B8234 | B8232 |
Dimension:
Britec Surge Protective Device Application:
• Used for electrical networks, electrical installations, and
electronic equipment.
• Protect low-voltage consumer installations from voltage surges of
all kinds.
• BR-20DP series surge arrester is installed between LPZ2 and LPZ3,
it can provide protection for equipments.
• Installed in to each electrical switch boards and prevents the
spread of surges in the electric systems, protecting the loads.
• It can discharge the surge current from the effect of lightning
spreading from earth conductor to the network conductors.
Britec Surge Protective Device Advantage:
• Compact single phase surge protector.
• DIN rail compatible.
• Provide the Visual indication of Protection Status.
• High discharge capacity.
• Based on high energy varistor equipped with thermal disconnectors
and failure indicator to comply with standards.
• Low residual voltage and quick response.
Our Services:
• 17 years global leading profession manufacture of electrical
products surge arrester.
• All products will be well packed before shipping.
• Standard packaging, and you can also tell us your own
requirements on packaging.
• Faster delivery.
• Individually Tested Prior to Shipment.
Noted:
• Type 3 surge protective devices are generally installed right in
front of the terminal device to be protected.
• Due to differing installation environments, type 3 SPDs are
available in a very wide range of designs. For example: in addition
to standard DIN rail mounting, there are devices for installation
in sockets or for direct mounting on a PCB of the end device.
• The device must be installed by electrically skilled person,
conforming to national standards and safety regulations.
• It is recommended that installation should be done under power
off condition.
Company Information:
Wenzhou Britec Electric Co.,Ltd. was founded in 2003, it's a
professional manufacturer in SPDs. We are specialized in developing
and marketing of high quality surge arresters, including AC surge
protector, DC surge protection device, data surge protective, LED
lightning protection in the market. Welcome all customers over the
world to contact us for future business relationship and achieving
mutual success!
Certificate:
Shipping:
FAQ:
Q1: Why Choose us?
A1. We have 17 years experiences on SPDs; Absolutely prompt
shipping time; OEM/ODM service; Good language communication 24
hours online.
Q2: How to get samples from us?
A2. Samples is not free, but sample fee will be returned if mass
order confirmed.
Q3: How to pay for order?
A3. You can pay by TT, Paypal etc.
Q4: What is the delivery time for order?
A4. If we have the products in stock, we could arrange shipping
within 5 days. If no stock, 20 days production time, it depends on
order quanitiy.
Q5: Do you accept my own design and logo printing?
A5. Yes, any customized design on anywhere of product is welcomed.
MOQ is 100pcs.
