1) Hot-pluggable
2) Status indicator: Green-OK, Red-Failed.
3) Working temperature: -40°C-80°C; Relative humidity: 5%-95%
4) Housing protection level (IEC 60529): IP20
5) Housing material fram-retarded level (Ul94): UL94-V0
6) SPD for electrical panel
| Model Name | BR-60 275 1P |
| Brand | BRITEC |
| Product Type | Surge Protection Device |
| SPD dassification according to EN61643-11 | Type 2 |
| SPD dassification according to IEC61643-11 | Class II |
| Max. Continuous Voltage Uc | 275V |
| Max. discharge current (8/20µs) Imax | 60kA |
| Nominal discharge current (8/20µs) In | 30kA |
| Voltage protection level Up | ≤1.5kV |
| Max. backup fuse | 200A gG |
| Response time tA | ≤25ns |
| For mounting on | 35mm Din rail |
| Degree of protection | IP20 |
| Manufacturer Guarantee | 5 Years Guarantee |
| No. of Phases | Single-Phase |
| Number of Poles | one pole |
| Operation temperature range | -40 ~ +80 degree |
| Remote control contacts | Optional |
Dimension:
BRITEC Type 2 Class C Surge Protection Application:
BR-60 1P is designed according to the IEC and GB standards, it
enables the connection between the power supply system and an
equipotential network instantanceously when the surge occurs and
limit the residual voltage to a certian level to protect the
devices protected. BR275-60 1P is used for Single phase TN systems.
SPD for ev charger.
BRITEC Type 2 Class C Surge Protection Advantage:
• Low residual voltage and quick response.
• Reliable control.
• Fault indication via red mark in the inspection window.
BRITEC Type 2 Class C Surge Protection Product installation:
1. SPD apply to power distribution system 275V second-level
lightning protection, it is installed in parallel on into the line
side of the total power distribution equipment or the power
distribution box in the buildings, with 35mm electrical lead rail,
Kevin connections can be used. Cut off the power before
installation, strictly prohibit powered operation.
2. Before installation please according to installation diagram of
connections, including L1, L2, L3 all are the phase line, N is zero
line, PE is ground line, please connect correctly. When
installation is complete, close the automatic circuit breaker,
check the working condition is normal or not.
3. During using lightning protection module, we should monitored
and check the status display window regularly, when the display
window was red or remote terminal output signal ,it means the
lightning protection module failure, it should be promptly repaired
or replaced.
4. Apply to indoor operation, such as outdoors installation, you
must install waterproof shell.
5. All wirings must be solid and connected by electric.
6. Lightningproof grounding should be consistent with lightning
protection regulatory requirements, grounding wire should be as
thick and short as possible.
We are a spd electrical systems inc.
Company profile:
Wenzhou Britec Electronic Co., Ltd. is a professional engaged in
SPD products research and development, design, production and
service in the integration of modern professional surge protection
production enterprises, production base is located in Yueqing,
Zhejiang, China. With OEM/ODM high standard production workshop,
has a new standard of high-end production equipment, perfect
supporting factory layout is reasonable, the spacious production
workshop, according to the international surge protector factory
standard production design, is the domestic strong r & d
manufacturers.
Our certificate:
Workroom:
FAQ:
Q1: What is the MOQ of each item?
A: Usually the MOQ is 100 pcs. If this product we have in stock,
there is no limitation for MOQ.
Q2: Do you have any guarantee for products?
A: Yes, sure. All products have five years guarantee.
Q3: Are you a factory or a trading company?
A: We are a factory with trading lines. We have in SPD field for
more than 21 yeas. We have full experience of producing surge
protection device.
Q4: How to control the quality?
A: Each product must be test before shipment. Our production line
full with professional skills and strict stardars.
Q5: How long does it take to delivery?
A: If have stock, within 1 week we can finished all the delivery.
If no have stock, normally around 3 weeks, depends on order.
